Figure 17 Systems Insight Display LEDs
.
Table 11 Systems Insight Display LED descriptions
StatusItem / Description
Green = Network link
Flashing green = Network link and activity
Off = No link to network. If the power is off, view the rear panel RJ-45
LEDs for status (see “HP X1800 Network Storage System and X3800
Network Storage Gateway rear panel LEDs and buttons” on page 34).
1. NIC link/activity LED
To determine Power cap status, see “Systems Insight Display LED combin-
ations” on page 38.
2. Power cap
Green = AMP mode enabled
Amber = Failover
Flashing amber = invalid configuration
Off = AMP modes disabled
3. AMP status
Off = Normal
Amber =Failure
For detailed information on the activation of these LEDs, see “Systems
Insight Display LED combinations” on page 38.
All other LEDs
HP X1000 and X3000 Network Storage System User Guide 37