Table 11 System option modes (continued)
MCU/RCUDefaultDescriptionCategoryMode
6. Tier relocation with monitoring data collected when the mode
is set to ON is disabled.
7. When THP is converted into Smart (after purchase of PP
license), the collected monitoring data is discarded.
Table 12 Mode 269: Remote Web Console operations
Mode 269 OFFMode 269 ONTarget of OperationOperation
No formatNo formatAll LDEVs in a PGVLL (CVS)
No formatNo formatSome LDEVs in a PGVLL (CVS)
No operationNo operationPG is specifiedFormat
Low speedLow speedAll LDEVs in a PGFormat
Low speedLow speedSome LDEVs in a PGFormat
Table 13 Mode 269: SVP operations
Mode 269 OFFMode 269 ONTarget of OperationOperation
High speedHigh speed-PDEV Addition
No formatNo formatAll LDEVs in a PGVLL (CVS)
No formatNo formatSome LDEVs in a PGVLL (CVS)
High speedHigh speedPG is specifiedFormat
Low speedHigh speedAll LDEVs in a PGFormat
Low speedLow speedSome LDEVs in a PGFormat
High speedHigh speed-PDEV Addition
Host modes and host mode options
The HP XP7 supports connection of multiple server hosts of different platforms to each of its ports.
When your system is configured, the hosts connected to each port are grouped by host group or
by target. For example, if Solaris and Windows hosts are connected to a fibre port, a host group
is created for the Solaris hosts, another host group is created for the Windows hosts, and the
appropriate host mode and host mode options are assigned to each host group. The host modes
and host mode options provide enhanced compatibility with supported platforms and environments.
The host groups, host modes, and host mode options are configured using the LUN Manager
software on Remote Web Console. For further information on host groups, host modes, and host
mode options, see the HP XP7 Provisioning for Open Systems User Guide.
Open systems operations
This section provides high-level descriptions of OPEN systems compatibility, support, and
configuration.
Open systems operations 51
To Next Page
Loading...
Need help?
General
