To Next Page

To Previous Page

Table 27 HP XP7 environmental specifications (continued)

In StorageNot OperatingOperatingItem

30 min, 5 to 100 Hz

--Up to 2.5

Earthquake

resistance (m/s2)

Horizontal:78.4 m/s

, 15 ms-Shock

Incline Impact 1.22 m/s

Vertical:

Rotational Edge 0.15 m

--60 m to 3,000 mAltitude

Notes:

1. Recommended temperature range is 21 to 24°C

2. On shipping/storage condition, the product should be packed with factory packing

3. The above specifications of vibration are applied to all three axes

4. See ASTM D999-01 The Methods for Vibration Testing of Shipping Containers.

5. See ASTM D5277-92 Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester.

6. See ASTM D6055-96 Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and

Crates.

7. Time is 5 seconds or less in case of the testing with device resonance point (6 to 7Hz).

8. When flash modules are installed in the system.

82 Specifications

HP XP7 Owner's Guide

Other manuals for HP XP7