EasyManuals Logo

HP xw9400 User Manual

HP xw9400
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #122 background imageLoading...
Page #122 background image
Problem Cause Solution
Drive not found.
Cable is loose. Reseat diskette drive data and power cables.
Removable drive is not seated
properly.
Reseat the drive.
Diskette drive cannot write to a
diskette.
Diskette is not formatted. Format the diskette.
Diskette is write-protected. Use another diskette or remove the write protection.
Writing to the wrong drive. Check the drive letter in the path statement.
Not enough space is left on the
diskette.
Use another diskette.
Diskette write control is
enabled.
Use Computer Setup to check the storage security
feature disabled settings.
Diskette is damaged. Replace the damaged disk.
Cannot format diskette. Invalid media reported. Check to see if diskette is bad.
When formatting a disk in MS-DOS, you might need to
specify diskette capacity. For example, to format a 1.44-
MB diskette, enter the following command at the
command prompt:
FORMAT A: /F:1440
A problem has occurred with a disk
transaction.
The directory structure is bad,
or there is a problem with a file.
Right-click Start, click Explore, and select a drive.
Select File>Properties>Tools. Under Error-checking,
click Check Now.
Diskette drive cannot read
a diskette.
Diskette is not formatted. Format the diskette.
You are using the wrong
diskette type for the drive type.
Be sure you use the correct diskette type for the type of
drive you are using.
You are reading the wrong
drive.
Check the drive letter in the path statement.
Diskette is damaged. Replace the diskette with a new one.
Invalid system disk is displayed. A diskette that does not contain
the system files needed to start
the workstation has been
inserted in the drive.
When drive activity stops, remove the diskette and press
the spacebar. The workstation should start up.
Diskette error has occurred. Restart the workstation by pressing the power button.
Cannot Boot from Diskette. Diskette is not bootable. Replace with a bootable diskette.
Diskette boot has been
disabled in Computer Setup.
Run Computer Setup and enable diskette boot in
Storage>Boot Order.
Removable media boot has
been disabled in Computer
Setup.
Run Computer Setup and enable Removable Media
Boot in Storage>Storage Options.
Table 5-5 Diskette problems (continued)
114 Chapter 5 System diagnostics and troubleshooting ENWW

Table of Contents

Other manuals for HP xw9400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP xw9400 and is the answer not in the manual?

HP xw9400 Specifications

General IconGeneral
BrandHP
Modelxw9400
CategoryDesktop
LanguageEnglish

Related product manuals