SPDIF OUT internal header Pin Signal
1
2
+VDC
Ground
NOTE The SPDIF Out internal header is used in parallel with the SPDIF OUT connector. Only
one should be used at a time.
SATA connector
Pin Signal Pin Signal Pin Signal
Data Cable Power Cable Power Cable
S-1 Ground P-1 3.3-V power P-8 5-V power
S-2* A+ P-2 3.3-V power P-9 5-V power
S-3* A- P-3 3.3-V power P-10 Ground
S-4 Ground P-4 Ground P-11 Reserved
S-5** B- P-5 Ground P-12 Ground
S-6** B+ P-6 Ground P-13 12-V power
S-7 Ground P-7 5-V power P-14 12-V power
* S2 and S3 differential signal pair
**S5 and S6 differential signal pair
P-15 12-V power
154 Appendix C Connector pins ENWW
To Next Page
Loading...
