EasyManua.ls Logo

HP xw9400 - Page 40

HP xw9400
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Heading Option Description
I/O**
APIC Interrupts APIC
Allow manual configuration of system IRQs.
For more details on using this feature and on maximizing interrupt performance, refer to the
Optimizing APIC Interrupt Assignments on the xw9400 white paper available at
http://tclperf.fc.hp.com/performance_briefs/index.htm.
Onboard
Devices
Disable or set IRQ, DMA, and I/O Range values for legacy devices.
PCI Devices Disable or select IRQ values for PCI devices.
Device Options NIC PXE Option ROM Download (Enable/Disable)
Disable means you cannot boot from this device, but more option ROM space is available for other
devices.
Onboard SAS Option ROM Download (Enable/Disable)
Disable means you cannot boot from SAS drives, but more option ROM space is available for
other devices.
SATA Option ROM Download (Enable/Disable)
Enables or disables downloading embedded SATA option ROM. Disable means you cannot boot
from SATA devices, but more option ROM space is available for other devices.
SATA RAID (Enable/Disable)
Enables or disables SATA drives for a RAID. If disabled, a single line is displayed. If enabled, the
menu expands to allow enabling/disabling each SATA port.
Num Lock State at Power-On (Off/On)
Sets the keyboard Num Lock state after POST. The Operating System can change this state, also.
S5 Wake on LAN (Enable/Disable)
Allows the network to wake the system from shutdown (ACPI S5). When set to Disable, system
power consumption is reduced to match Federal Energy Management Program (FEMP) guidelines.
Unique Sleep State Blink Rates (Enable/Disable)
Assigns different LED blink patterns for S1 and S3. (The system LED is off for S4 and S5.)
Monitor Tracking (Enable/Disable)
Enabling this option allows the ROM to save the monitor asset tracking information such as the
serial number and model.
Slot Options Modifies options for:
Slot 1—PCI Express x8
Slot 2—PCI Express x16 graphics
Slot 3—PCI 32 bit, 33 MHz
Slot 4—PCI Express x16 (x8)
Slot 5—PCI Express x16 graphics
Slot 6—PCI-X 100
Slot 7—PCI-X 100/133
Table 3-1 Computer Setup Utility menu descriptions (continued)
32 Chapter 3 System management ENWW

Table of Contents

Other manuals for HP xw9400

Related product manuals