5 Setting up, backing up, restoring, and
recovering Windows 7
This chapter provides setup and update information for the Windows 7 operating system. It includes these
topics:
●
Setting up the Windows 7 operating system
●
Backing up, restoring, and recovering Windows 7
CAUTION: Do not add optional hardware or third-party devices to the HP Workstation until the operating
system is successfully installed. Adding hardware might cause errors and prevent the operating system from
installing correctly.
NOTE: After you set up the operating system, be sure that the latest BIOS, drivers, and software updates are
installed on the workstation. See Updating the workstation on page 37.
Setting up the Windows 7 operating system
CAUTION: After installation has started, do not turn o the workstation until the process is complete.
Turning o the workstation during installation can damage the installation and operation of the software.
For complete installation and conguration instructions, go to http://windows.microsoft.com/en-US/
windows7/help. Additional information is available in the Windows 7 online Help after you successfully install
the operating system.
Installing or upgrading device drivers
You must install the appropriate device drivers before you install hardware devices. Follow the installation
instructions that came with each device. For optimum performance, your operating system must have the
most recent updates, patches, and service packs. See http://www.hp.com for HP-qualied drivers. For
additional driver and software update information, see Updating the workstation on page 37.
Transferring les and settings
The Windows operating system oers data migration tools that help you select and transfer les and data
from one Windows-based workstation to another.
For information about these tools, go to http://www.microsoft.com.
28 Chapter 5 Setting up, backing up, restoring, and recovering Windows 7
To Next Page
Loading...
