4
Installing the switch
CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact Hewlett Packard Enterprise for permission. Otherwise, Hewlett Packard
Enterprise shall not be liable for any consequence caused thereby.
Figure 1 Hardware installation flow
Installing the switch in a 19-inch rack
IMPORTANT:
To install the switch in a 19-inch rack, make sure the rack has a minimum depth of 1000 mm (39.37
in) so that the rack door can be closed easily.
To Next Page
Loading...
Need help?
General