HPE OfficeConnect 1950 12XGT 4SFP+

19
For more information about console login, see the getting started guide for the device.
3. Assign the login host an IP address in the same subnet as the device.
4. Open the browser and enter login information.
a. In the address bar, enter the IP address of the device.
 HTTP access—Enter the address in the http://ip-address:port or ip-address:port
format.
 HTTPS access—Enter the address in the https://ip-address:port format.
The ip-address argument represents the IP address of the device. The port argument
represents the HTTP or HTTPS service port. The default port number is 80 for HTTP and
443 for HTTPS. You do not need to enter the port number if you have not changed the
service port setting.
b. On the login page, enter the default username (admin) and the verification code.
You do not need to enter a password at the first login.
c. Click Login.
5. Change the login information.
 To change the password of the login user (admin at the first login), click the Admin icon
.
 To add new user accounts and assign access permissions to different users, select Device
> Maintenance > Administrators.
For more information about how to configure the device by using the Web interface, see HPE
OfficeConnect 1950 12XGT 4SFP+ Switch (JH295A) User Guide.