To Next Page
D
Dennis PayneJul 28, 2025
What to do if the system status LED is off with concurrent RPS and AC inputs on my HPE Switch?
- MMorgan DunnJul 28, 2025
If the system status LED is off when using both RPS and AC inputs on your HPE Switch, first ensure the AC power cord is properly connected to the switch, the AC-input power receptacle, and the AC power outlet. Next, check that the external AC power system and the RPS are functioning correctly and that the switch is securely connected to the RPS. Finally, confirm that the switch's operating temperature is within an acceptable range and that the power module has adequate ventilation. Overheating can cause the power module to shut down as a protective measure.
General
