EasyManua.ls Logo

HPE ProLiant DL20 - Removing the DIMM

HPE ProLiant DL20
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DIMM type DIMM rank Maximm capacitiy
UDIMM Single-rank (4 GB) 16
UDIMM Single-rank (8 GB) 32
UDIMM Dual-rank (8 GB) 32
UDIMM Dual-rank (16 GB) 64
Intel Xeon E3-1200 v6 processor, 3.50-GHz Intel Pentium G4560 processor, 3.60-GHz Intel Pentium G4600
processor, 3.90-GHz Intel Core i3-7100 processor, or 4.00-GHz Intel Core i3-7300 processor:
DIMM type DIMM rank Maximm capacitiy
UDIMM Single-rank (8 GB) 32
UDIMM Dual-rank (16 GB) 64
Removing the DIMM
Procedure
1. If installed, remove the security bezel.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
Extend the server from the rack
Remove the server from the rack
5. Remove the access panel.
6. Remove the air baffle.
7. Open the DIMM slot latches.
8. Remove the DIMM.
To replace the component, reverse the removal procedure.
48 Removing the DIMM

Table of Contents

Related product manuals