10. Remove the RPS backplane.
11. Remove the power input module.
To replace the component, reverse the removal procedure.
HP Trusted Platform Module
About this task
The TPM is not a customer-removable part.
CAUTION:
Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security
rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider the
system compromised and take appropriate measures to ensure the integrity of the system data.
If you suspect a TPM board failure, leave the TPM installed and remove the system board. Contact a Hewlett
Packard Enterprise authorized service provider for a replacement system board and TPM board.
HP Trusted Platform Module 71
To Next Page
Loading...
