Replacing the FlexibleLOM riser board
About this task
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION:
To prevent damage to electrical components, take the appropriate anti-static precautions before
beginning any installation, removal, or replacement procedure. Improper grounding can cause
electrostatic discharge.
Procedure
1. If installed, remove the security bezel.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all cables from the FlexibleLOM.
5. Do one of the following:
• Extend the server from the rack
• Remove the server from the rack
6. Remove the access panel.
7. Remove the FlexibleLOM riser cage.
8. Remove the FlexibleLOM adapter.
Replacing the FlexibleLOM riser board 55
To Next Page
Loading...
