ResultsResults
To replace the component, reverse the removal procedure.
HPE NS204i-u Boot Device HPE NS204i-u Boot Device replacementreplacement
SubtopicsSubtopics
Removing and replacing the boot device cage assemblyRemoving and replacing the boot device cage assembly
Removing and replacing a boot device carrier without the security cover installedRemoving and replacing a boot device carrier without the security cover installed
Removing and replacing a boot device drive without the security cover installedRemoving and replacing a boot device drive without the security cover installed
Removing and replacing a boot device carrier with a security cover installedRemoving and replacing a boot device carrier with a security cover installed
Removing and replacing a boot device drive with the security cover installedRemoving and replacing a boot device drive with the security cover installed
Removing and replacing the Removing and replacing the boot deviceboot device cage assembly cage assembly
About this taskAbout this task
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
ProcedureProcedure
1. Back up all server data.
2. If installed, open the cable management arm .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
To Next Page
Loading...
