ItemItem DescriptionDescription
1 Processor carrier latches
2 Heatsink latches
3 Heatsink nuts
4 Processor-heatsink
module
5 Alignment screws
6 Bolster plate
This module consists of the heatsink attached to the processor that is already secured in its carrier.
Closed-loop liquid cooling heatsink componentsClosed-loop liquid cooling heatsink components
IMPORTANT:IMPORTANT:
Maximum Usage Limitation ReminderMaximum Usage Limitation Reminder : The closed-loop liquid cooling heatsink used in this server is subject to a
Maximum Usage Limitation not to exceed five (5) years of operation. After reaching this five (5) years limit, it is
required that the liquid cooling heatsink be replaced. Parts and components that Hewlett Packard Enterprise
determines have reached or exceeded their Maximum Usage Limitation will not be provided, repaired, or replaced
under a warranty or service contract. Contact your local HPE sales representative for additional information.
The tubes of the liquid cooling heatsink are prefilled with coolant. In the unlikely event of a spill or leak of this
server coolant, follow the recommended procedure in Appendix I: Server coolant spill response of the server
maintenance guide:
https://www.hpe.com/info/dl360gen11-msg
1
1
To Next Page
Loading...
