HPE ProLiant DL360 Gen11

Remove the primary PCIe riser cageRemove the primary PCIe riser cage
About this taskAbout this task
CAUTION:CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC power
cords before removing or installing the PCI riser cage.
ProcedureProcedure
1. Back up all server data.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
5. Remove the access panel .
6. Remove the PCI riser cage.
HPE ProLiant DL360 Gen11 Server User Guide 33