Table of contentsTable of contents
Component identification
Front panel components
Front panel LEDs and buttons
UID button functionality
Front panel LED power fault codes
Systems Insight Display LEDs
Systems Insight Display combined LED descriptions
Rear panel components
Rear panel LEDs
System board components
Heatsink and processor socket components
Closed-loop liquid cooling heatsink components
System maintenance switch descriptions
DIMM label identification
DIMM slot locations
Drive boxes and numbering
Hot-plug fans
HPE Basic Drive LED definitions
HPE NS204i-u Boot Device components
HPE NS204i-u Boot Device LED definitions
Setup
Optional services
Setting up the server
Operational requirements
Space and airflow requirements
Temperature requirements
Power requirements
Electrical grounding requirements
Rack warnings and cautions
Server warnings and cautions
Electrostatic discharge
Operations
Server data backup
Power down the server
Extend the server from the rack
Release the cable management arm
Remove the server from the rack
Remove the access panel
Remove the primary PCIe riser cage
Install the primary PCIe riser cage
Removing a hot-plug SAS/SATA/NVMe drive
Accessing the Systems Insight Display
To Next Page
Loading...
