Server serial number and the product ID
iLO-related data—Use the iLO backup and restore function. For more information, see the iLO user guide
(https://www.hpe.com/support/ilo6https://www.hpe.com/support/ilo6).
iLO license
Customer iLO user name, password, and DNS name
iLO configuration settings
For servers managed by HPE GreenLake for Compute Ops Management , make sure that you have your HPE GreenLake account ID.
For more information, https://www.hpe.com/info/com-docshttps://www.hpe.com/info/com-docs.
Power down the serverPower down the server
Before powering down the server for any upgrade or maintenance procedures, perform a backup of critical server data and programs.
IMPORTANT:IMPORTANT:
When the server is in standby mode, auxiliary power is still being provided to the system.
To power down the server, use one of the following methods:
Press and release the Power On/Standby button.
This method activates a controlled shutdown of applications and the OS before the server enters standby mode. It can also activate
a shutdown behavior governed by an OS configuration or policy.
Press and hold the Power On/Standby button for more than 4 seconds to force the server to enter standby mode.
This method forces the server to enter standby mode without properly exiting applications and the OS. If an application stops
responding, you can use this method to force a shutdown.
Use a virtual power button selection through iLO.
This method initiates a controlled remote shutdown of applications and the OS before the server enters standby mode.
Before proceeding, verify that the server is in standby mode by observing that the system power LED is amber.
Extend the server from the rackExtend the server from the rack
PrerequisitesPrerequisites
You might need a T-25 Torx screwdriver to loosen the shipping screws.
Review the:
Rack warnings and cautions
Server warnings and cautions
ProcedureProcedure
Extend the server from the rack.
WARNING:WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized
before extending anything from the rack.
To Next Page
Loading...
