Server warnings and cautions
About this taskAbout this task
WARNING:WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized
before extending anything from the rack.
ProcedureProcedure
1. Power down the server .
2. Release the cable management arm .
3. Disconnect the cabling from the rear panel.
4. Extend the server from the rack .
5. Remove the server from the rack:
6. Place the server on a sturdy, level surface.
Remove the access panelRemove the access panel
About this taskAbout this task
WARNING:WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components
to cool before touching them.
CAUTION:CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the server in
this manner results in improper airflow and improper cooling that can lead to thermal damage.
ProcedureProcedure
1. Power down the server .
2. Extend the server from the rack .
3. Open or unlock the locking latch, slide the access panel to the rear of the chassis, and remove the access panel.
To Next Page
Loading...
