Electrostatic dischargeElectrostatic discharge
Optional servicesOptional services
Delivered by experienced, certified engineers, HPE support services help you keep your servers up and running with support packages
tailored specifically for HPE ProLiant systems. HPE support services let you integrate both hardware and software support into a single
package. A number of service level options are available to meet your business and IT needs.
HPE support services offer upgraded service levels to expand the standard product warranty with easy‑to‑buy, easy‑to‑use support
packages that will help you make the most of your server investments. Some of the HPE support services for hardware, software, or
both are:
HPE Pointnext Tech Care – Keep systems running.
The time commitment for this service might vary depending on the site's geographical region. For more service information
available at your site, contact your local HPE support centerHPE support center.
Deployment service for both hardware and software.
HPE Education Services – Help train your IT staff.
For more information on HPE support services, see the HPE Pointnext website:
https://www.hpe.com/serviceshttps://www.hpe.com/services
Setting up the serverSetting up the server
PrerequisitesPrerequisites
Before setting up the server:
Read the operational requirements for the server:
Operational requirements
Read the safety and compliance information on the HPE website:
http://www.hpe.com/support/safety-compliance-enterpriseproductshttp://www.hpe.com/support/safety-compliance-enterpriseproducts
ProcedureProcedure
1. Unbox the server and verify the contents:
A server
A power cord
Rack-mounting hardware
Documentation
2. (Optional) Install hardware options.
3. Install the server in a rack.
The rack procedures are included with the rack rails.
a. Connect devices, cables, and cords to the server.
b. Secure cables using the cable management arm.
4. Decide how to manage the server:
Locally: use a KVM switch or a connect a keyboard, monitor, and mouse.
Remotely: connect to the iLO web interface using remote console.
a. Verify the iLO management port is connected to a secure network.
b. Using a browser, navigate to the iLO web interface, and then log in.
To Next Page
Loading...
