HPEHPE Basic Drive LED definitions Basic Drive LED definitions
The HPE Basic drive carrier has the following LEDs:
Amber/blue LED—Managed by the drive backplane in conjunction with the storage controller and is used to indicate drive status.
Green LED—Managed by the drive itself and indicates the drive activity.
LFF LFF low-profile drive carrierlow-profile drive carrier
The LFF low-profile drive carrier supports hot-plug SAS or SATA .
SFF SFF basic drive carrierbasic drive carrier
The SFF basic drive carrier supports hot-plug SAS, SATA, or U.3 NVMe .
ItemItem LEDLED StateState DefinitionDefinition
1 Fault/Locate Solid amber This drive has failed, is unsupported, or is invalid.
Solid blue The drive is operating normally and being identified by a
management application.
Flashing amber/blue (1
flash per second)
The drive has failed, or a predictive failure alert has been received
for this drive. The drive has also been identified by a management
application.
Flashing amber (1 flash per
second)
A predictive failure alert has been received for this drive. Replace
the drive as soon as possible.
Off The drive is operating normally and not being identified by a
management application.
2 Online/Activity Solid green The drive is online and has no activity.
To Next Page
Loading...
