HPE ProLiant DL360 Gen11

S12 Off Reserved
PositionPosition DefaultDefault FunctionFunction
To access the redundant ROM, set S1, S5, and S6 to On.
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all configuration
settings to their manufacturing defaults.
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some configurations cannot
be restored. For more information, see Configuring the server.
DIMM label identificationDIMM label identification
To determine DIMM characteristics, see the label attached to the DIMM. The information in this section helps you to use the label to
locate specific information about the DIMM.
For more information about product features, specifications, options, configurations, and compatibility, see the HPE DDR5
SmartMemory QuickSpecs:
https://www.hpe.com/docs/server-memoryhttps://www.hpe.com/docs/server-memory
ItemItem DescriptionDescription ExampleExample
1 Capacity 16 GB
32 GB
64 GB
128 GB
256 GB
2 Rank 1R—Single rank
2R—Dual rank
4R—Quad rank
8R—Octal rank
3 Data width on DRAM x4—4-bit
x8—8-bit
4 Memory generation PC5—DDR5
5 Maximum memory speed 4800 MT/s
6 CAS latency B—42-42-42
B—50-42-42 (for 128 GB and 256 GB capacities)
1
2
3
HPE ProLiant DL360 Gen11 Server User Guide 18