Installing a smart storage battery/capacitorInstalling a smart storage battery/capacitor
PrerequisitesPrerequisites
Be sure you have the components included with the hardware option kit.
ProcedureProcedure
1. Power down the server .
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Install the energy pack.
6. If needed, connect the extension cable.
7. Connect the cable to the system board.
To Next Page
Loading...
