If you do not require in-rack serviceability for your rack-mounted server, use the rack rail hook-and-loop strap, instead of a CMA, to
manage the rear panel cables. The hook-and-loop strap can be installed on either the left or right rack mounting rail.
ProcedureProcedure
1. Attach the strap carabiner to the rack mounting rail.
2. Bundle the rear panel power cords and peripheral cables, and then wrap the strap around the cables.
Installing the cable management armInstalling the cable management arm
PrerequisitesPrerequisites
Before you perform this procedure, review the Rack warnings and cautions.
ProcedureProcedure
1. Connect and secure all peripheral cables and power cords to the rear panel.
2. (Optional) Rotate the bracket.
To Next Page
Loading...
