3. If removed, install the internal USB device.
4. Install the chassis cover .
5. If removed, install the security padlock and/or the Kensington security lock.
For more information, see the lock documentation.
6. Connect all peripheral cables to the server.
7. Connect the power adapter to the server, and then secure the power adapter cord in the power cord clamp.
8. Connect the power cord to the AC source.
9. Power up the server .
Installing the chassis coverInstalling the chassis cover
ProcedureProcedure
1. Install the chassis cover:
a. Insert the cover tabs to their chassis openings. Make sure that the cover is flushed against the top of the chassis.
To Next Page
Loading...
