• Server in rack mode: Install the server into the rack.
• Server in tower mode: Return the server to an upright position.
13. Connect all peripheral cables to the server.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16.
Power up the server.
Replace the system battery
Prerequisites
Before you perform this procedure make sure you have a small flat-bladed, nonconductive tool available.
Procedure
1.
Locate the battery on the system board.
2.
Use a small flat-bladed, nonconductive tool to carefully lift the front of the battery from the socket.
3.
Remove the battery.
4. Install the system battery.
System battery replacement
143
To Next Page
Loading...
