12. Install the 4 LFF non-hot-plug drive cage assembly.
13.
Connect the drive cables.
14.
Install the system air baîš‚le.
15. Install the PCI air baîš‚le.
16.
Install the front bezel.
17. Install the access panel.
18. Do one of the following:
• Server in rack mode:
Install the server into the rack.
• Server in tower mode: Return the server to an upright position.
19. Connect all peripheral cables to the server.
20. Connect each power cord to the server.
Hardware options installation
47
To Next Page
Loading...
