EasyManua.ls Logo

HPE ProLiant ML350 Gen10 - Power Supply Specifications; HPE 500 W Low Halogen Non-Hot-Plug Power Supply

HPE ProLiant ML350 Gen10
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specification Value
Weight, maximum 41 kg (90.39 lb)
Rack model
—
Height 17.4 cm ( 6.85 in)
Depth 64.8 cm (25.51 in)
Width 44.5 cm (17.52 in)
Weight, minimum 21 kg (46.30 lb)
Weight, maximum 41 kg (90.39 lb)
Power supply specifications
Depending on the installed options and the regional location where the server was purchased, the server
can be configured with one of the following power supplies:
• HPE 500W Low Halogen Non-hot-plug Power Supply on page 157
This power supply is only supported when the server is in tower mode.
• HPE 500W Flex Slot Platinum Hot-plug Low Halogen Power Supply on page 158
• HPE 800W Flex Slot Platinum Hot-plug Low Halogen Power Supply on page 159
• HPE 800W Flex Slot Titanium Hot-plug Low Halogen Power Supply on page 160
• HPE 800W Flex Slot Universal Hot-plug Low Halogen Power Supply on page 161
• HPE 800W Flex Slot -48VDC Hot-plug Low Halogen Power Supply on page 161
• HPE 1600W Flex Slot Platinum Hot-plug Low Halogen Power Supply on page 163
For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise
website.
HPE 500W Low Halogen Non-hot-plug Power Supply
Specification Value
Input requirements —
Rated input voltage
100 VAC to 240 VAC
240 VDC for China only
Rated input frequency 50 Hz to 60 Hz
Table Continued
Specifications 157

Table of Contents

Other manuals for HPE ProLiant ML350 Gen10

Related product manuals