EasyManua.ls Logo

HPE ProLiant XL170r Gen10

HPE ProLiant XL170r Gen10
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
Environmental specifications
Specification Value
Temperature range
1
Operating 10°C to 35°C (50°F to 95°F)
Non-operating -30°C to 60°C (-22°F to 140°F)
Relative humidity (noncondensing)
Operating 8% to 90%
28°C (82.4°F), maximum wet bulb temperature
Non-operating
5% to 95%
38.7°C (101.7°F), maximum wet bulb temperature
1
All temperature ratings shown are for sea level. An altitude derating of 1.0°C per 305 m (1.8°F per 1000 ft) to 3050 m
(10,000 ft) is applicable. No direct sunlight allowed. Maximum rate of change is 20°C per hour (36°F per hour). The
upper limit and rate of change might be limited by the type and number of options installed.
For certain approved hardware configurations, the supported system inlet temperature range is extended:
5°C to 10°C (41°F to 50°F) and 35°C to 40°C (95°F to 104°F) at sea level with an altitude derating of
1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3050 m
(10,000 ft).
40°C to 45°C (104°F to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F
per every 410 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft).
Mechanical specifications
Specification Value
Height 4.13 cm (1.63 in)
Depth 65.80 cm (25.91 in)
Width 18.45 cm (7.27 in)
Weight (approximate values)
Weight (maximum) 4.61 kg (10.17 lb)
Weight (minimum) 3.30 kg (7.27 lb)
Hot-plug power supply calculations
For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, see the Hewlett Packard Enterprise Power Advisor website (http://www.hpe.com/info/
poweradvisor/online).
Specifications 89

Table of Contents

Other manuals for HPE ProLiant XL170r Gen10

Related product manuals