HPE StoreOnce 3620

Installing optional hardware
• HPE StoreOnce Gen4 10/25Gb SFP Network Card Optional Kit (BB982A)
• HPE StoreOnce Gen4 10GbE-T Network Card Optional Kit (BB984A)
• HPE StoreOnce Gen4 16Gb FC Card Optional Kit (BB986A)
• HPE StoreOnce Gen4 32Gb FC Card Optional Kit (BB990A)
Optional hardware kit contents
• Fibre Channel kit
◦ A 16Gb or 32Gb Fibre Channel 2-port adapter
◦ Two Short Wave FC SFP+ transceivers appropriate for the supplied card:
– 16Gb transceiver —Part Number: E7Y09-63001
– 32Gb transceiver —Part Number: P9H30-63001
◦ A License Entitlement certificate
• 10 GbE network kit
◦ A 10 GbE-T or 10/25Gb SFP 2-Port Adaptor card
◦ The SFP model has two 10 Gb SR SFP+ transceivers, appropriate for the supplied card (Part
Number: 455884-B21)
You must order the 25 Gb SFP+ transceivers (Part Number: 845398-B21) separately if you want to
connect to 25Gb switches.
◦ A License Entitlement certificate
Installation scenarios
There are two installation scenarios for the optional hardware kits.
Optional hardware kits that are ordered with the initial installation:
• The PCIe card will already be installed.
• SFP+ transceivers will not be installed; they will be in the StoreOnce System Accessory box. To plug in
the SFP+ transceivers, follow the instructions in this guide.
• The license will already be installed and the optional hardware is activated.
Optional hardware kits that are ordered after the initial installation require the following actions:
132 Installing optional hardware