Installing the StoreOnce 3640 System server
Prerequisites
Required tools:
• Torx T25 screwdriver
• A monitor and USB keyboard or a KVM for initial network configuration
Procedure
1. Verify that you received the following components:
• StoreOnce System server
• Rail kit
• Security bezel
• Two power cables
• Two network cables
2. Record the iLO default network information from the label on top of the server.
iLO user name:________________________
iLO network name:_____________________
iLO password:_________________________
3. Install the optional PCIe cards, if necessary.
• If the optional PCIe cards were ordered with the system, they have been preinstalled.
• If the cards were ordered separately, install them now.
Figure 10: PCI slot numbering
a. Install the network cards starting in PCI slot 1 and then additional network cards in slots 2, 4, and
5 in that order.
b. Install the FC cards starting at PCI slot 5 and then additional FC cards in slots 4, 2, and 1 in that
order.
c. Verify that the correct SFP+ transceivers are fitted, if necessary.
For detailed installation instructions, see Install PCIe cards .
22 HPE StoreOnce 3640 System
To Next Page
Loading...
