HPE StoreOnce 3620

The Initialization Console
The Initialization Console supports features that cannot be accessed from the StoreOnce Management
Console or REST API. The Initialization Console also includes functions that pertain to the Initialization
Console.
•
Determining the initial DHCP network address
• Configuring the initial system networking
• Resetting the local admin password
• Changing the Initialization Console password
The Initialization Console password can also be changed from the StoreOnce Management Console.
• Enabling support access
Accessing the Initialization Console
Procedure
1. Log in to the physical, iLO, or hypervisor console.
• User: console
• Password: The current console password. This password is changed the first time someone logs in
to the Initialization Console or runs the First Time Setup wizard. The default is changeme.
Determining the initial DHCP network address
The first time the StoreOnce System accesses the network, it attempts to obtain an IPv4 or IPv6 DHCP
address.
Procedure
Log in to the Initialization Console.
If the system obtained a DHCP address, it is displayed on the StoreOnce dialog.
Configuring the initial system networking
Configure the StoreOnce System networking from the Initialization Console in the following cases:
142 The Initialization Console