b. Lock the bezel.
The key to lock the bezel is attached to the back of the security bezel. One key is supplied.
13. Power on the StoreOnce System (the power button is on the front of the server).
• The power button LED flashes green at the start of the power-on sequence and then turns solid
green.
• The system health LED flashes green at the start of the power-on sequence and then turns solid
green.
• If LAN port 1 is connected to an active link, the NIC status LED will also begin to flash green
when the StoreOnce System is powering up.
• While configuring the system using iLO virtual console, the UID LED flashes blue.
46 HPE StoreOnce 5200 System