2 Technical Specifications
26
HSD S.p.A. © - 0102h00a.fm100713
1 Exposed area of the screw dowel to perform tool change
2 Electronic connector of the encoder
3 Sensors area
4 Helicoidal casing to optimise cooling
5 Electrospindle "nose"
6 Labyrinth with pressurisation
7 Stator cable outlet (electrospindle power)
8 No. 2 of 3 Or seats for the hydraulic seal of the cooling cylinder liner
9 Serial number
10 Front flange
11 Spindle shaft
12 Tool coupling system
To Next Page
Loading...
