Need help?Do you have a question about the HSD SM 141 D and is the answer not in the manual?
General| Type | Industrial Monitor |
|---|---|
| Brightness | 300 cd/m² |
| Power Consumption | 15W |
| Screen Size | 14.1 inches |
| Display Technology | TFT LCD |
| Operating Temperature | -10°C to 60°C |
| Humidity | 10% to 90% (non-condensing) |
| Mounting | VESA 75 x 75 mm, 100 x 100 mm |
| Interface | VGA |
General overview and purpose of the manual.
Defines the manual's target audience and content.
Explains safety and information symbols.
Lists accompanying documentation.
How to obtain additional documentation.
How to identify the product and its origin.
Details on product guarantee terms and conditions.
General rules for safe product operation and handling.
Precautions for performing maintenance safely.
Hazards related to improper operation and handling.
Identifies inherent dangers that remain after safety measures.
Explains the meaning of safety and warning labels.
Overview and uses of the SM 141 D servo-motor.
Detailed view and identification of SM 141 D parts.
Overview and uses of the CPH 400 B electronic drive.
Detailed view and identification of CPH 400 B parts.
Explanation of the shared DC bus power system.
Details on product ID plates and markings.
Information on product safety markings.
Safety precautions for handling and shipping.
Specifications for the product packaging.
Methods and conditions for shipping.
Steps for safely opening and removing the product.
Recommendations for product storage conditions.
Steps before starting installation.
Requirements for power and other services.
Conditions for the installation site.
Procedures for physically mounting the devices.
Mounting details for SM 141 D.
Mounting details for CPH 400 B.
Wiring procedures for SM 141 D and CPH 400 B.
Various ways to connect the DC bus.
Proper handling of electrical connectors.
Identification of all device connectors.
Specifications for DC bus power cables.
Method for verifying correct wiring.
Information on the fieldbus communication.
Details on the E-NETx communication protocol.
How braking affects the DC bus voltage.
Setting up device addresses and line termination.
Specific dipswitch settings for E-NETx.
Setting up bus addresses and termination.
Understanding device status through LEDs.
Final checks after installation.
Initial operation cycle for new products.
Recommended operating environment.
How to clean the product to maintain efficiency.
Electrical and mechanical specifications.
Contact information for support and service.
To Next Page
