4 Transport, packing, unpacking, storage
30
HSD S.p.A. © - h0103k00a.fm091115
4.3 Transport and packing
The product can be shipped using various forms of transport (road, rail, sea, air), and the method
is usually agreed with the customer at the time of purchase.
The product is shipped protected by a VCI (Volatile Corrosion Inhibitor) plastic wrapping and
impact proof material and packed in a cardboard box.
In some cases the product can be packed as requested by the customer.
Furthermore, it is necessary that during transport the following environmental conditions are
observed:
4.4 Unpacking
Verify the integrity of the packing before opening.
Open the box and remove the product by hand, gripping the motor or body.
Do not lift the product by the wiring.
All the packaging scrap is to be disposed of according to the material and in compliance with
current regulations in the country of use.
4.5 Storage
If the product is to be placed in storage, it must be stored with its original packing.
The packed product must be stored in a place that is protected from bad weather (rain, water,
humidity).
Furthermore, it is necessary that during storage the following environmental conditions are
observed:
Transport temperature -25°C ÷ +70°C (-13°F ÷ +158°F)
Non condensing relative humidity max. 95% at 40°C
Storage temperature –25°C ÷ +55°C (-13
°F ÷ +131°F)
Relative humidity 5% ÷ 95%
To Next Page
Loading...
Need help?
General
