2 Safety information
HSD S.p.A. © - h0115k00a.fm091115
19
2.5 Signs fixed to the product
Below is described the meaning of the signs applied to the product.
The signs fixed to the product must never be removed for any reason whatsoever.
The signs must be clearly legible.
Damaged signs should be replaced (request new ones from the manufacturer).
Check the identification plates are clearly legible. If this is not the case, replace them
with new ones in the same positions.
DANGER OF ELECTROCUTION! Do not access any internal parts of the
equipment. Danger of electrocution. Before carrying out any operations on the
electrical system, make sure that the power supply has been turned off.
DANGER, HOT SURFACES! High temperature component, risk of burning. Wear
suitable protective clothing.
USER MANUAL! It is compulsory to read the whole user manual before
performing any operations.
FUNCTIONAL EARTH CONNECTION; disturbance-free earth connection. To be
used to improve the EMC characteristics of the device when the earthing through
the mounting flange and earthing of the motor cable are not enough.
To Next Page
Loading...
