8 Replacing components
HSD S.p.A. © - 0108h02a.fm100713
95
8 Replacing components
In order to be able to work in complete safety on an electrospindle installed on a
machine, refer to the machine's instruction manual.
The electrospindle contains a spring that has been pre-loaded with a force of
around one hundred kilograms. This spring is applied to a screw dowel that can
be violently ejected if the electrospindle is dismantled by inadequately trained
personnel.
Only carry out the operations described in this manual. Follow the instructions
scrupulously and in the case of doubt, contact the Manufacturer's Assistance
Service.
Observe the maintenance safety instructions given on page 91.
Replacement and adjustment operation are only authorised with the original
spare parts of the manufacturer described in this section of the manual.
Any other type of intervention is not allowed and will invalidate the warranty.
To Next Page
Loading...
