3 Transport, packing, unpacking, storage
HSD S.p.A. © - 0103h03a.fm100713
45
3.5 Storage
If the product is to be placed in storage, it must be protected against weather, humidity, dust and
aggressive atmospheric and environmental agents.
With the product in storage:
Carry out periodic checks to ascertain the general storage condition of the product.
Manually rotate the shaft approximately once a month to make sure that the bearings remain
perfectly greased.
Furthermore, it is necessary that during storage the following environmental conditions are observed:
Storage temperature –5°C ÷ +55°C (23°F ÷ +131°F)
Non condensing relative humidity 5% ÷ 55%
The maximum storage time for an HSD product is 12 months.
For periods longer than 12 months, the product must be inspected by
personnel authorised by the manufacturer.
For more information, refer to the Assistance Service.
To Next Page
Loading...
