Reconnecting a Bluetooth headset
Normally, you can easily reconnect your headset by switching on Bluetooth on HTC 10,
and then turning on the headset.
However, you might have to connect manually if your headset has been used with
another Bluetooth device.
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 239.
2. Tap the headset’s name in the Paired Devices section.
3. If prompted to enter a passcode, try or , or consult the headset
documentation to find the passcode.
If you still cannot reconnect to the headset, follow the instructions in Unpairing from a
Bluetooth device on page 241, and then follow the steps under Connecting a Bluetooth
headset on page 240.
Unpairing from a Bluetooth device
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 239.
2. In the Paired devices section, tap
next to the device to unpair.
3. Tap Unpair.
Wireless sharing 241
To Next Page
Loading...
