Sharing and streaming content
Casting the headset to a web browser
You can share what you see in VR with others by casting your headset to a web browser on a
computer or mobile device.
§ Your headset and the computer or mobile device must be connected to the same Wi-Fi
network.
§ To enable casting in passthrough mode, go to Settings, select Advanced Camera
settings, and then turn on Allow passthrough recording and casting.
1. Open the VIVE Menu by pressing the VIVE button on your right controller.
You can also use hand gestures to open the VIVE Menu. For details, see
Hand tracking on
page 30.
2. Select Cast Cast to browser.
An IP address with the following format will be displayed: http://
[IP]
:8080/cast
For example:
3. Open a web browser on your computer or mobile device and enter the IP address.
4. When a welcome page appears, click Connect.
You'll then see the VR screen.
5. While viewing the VR screen in the browser, you can use the following controls:
56 Sharing and streaming content
To Next Page
Loading...
