Control Description
Unmute or mute the audio from the headset
Take a screenshot
Start or stop screen recording
Switch between16:9 and 1:1 aspect ratio
Switch between full screen and the original window size
6. To stop casting, click Disconnect in the browser or select Stop casting on your headset.
Casting the headset to an external display
You can share what you see in VR with Miracast
™
devices such as TVs wirelessly in real time.
Your view in VR will appear on the device you choose, allowing you to share your VR experience
with others.
§
The headset supports connecting to Miracast devices on both the 5 GHz and 2.4 GHz bands
via Wi-Fi Direct
®
.
§ To enable casting in passthrough mode, go to Settings, select Advanced Camera
settings, and then turn on Allow passthrough recording and casting.
1.
Open the VIVE Menu by pressing the VIVE button on your right controller.
You can also use hand gestures to open the VIVE Menu. For details, see
Hand tracking on
page 30.
2. Select Cast.
3. Choose a display device to cast to.
§
If the display device is not on the list, make sure the device is set to receive an incoming cast.
§ Screen casting pauses automatically when you access certain kinds of dialog boxes, such as
password screens. Screen casting may also be disabled in some apps.
57 Sharing and streaming content
To Next Page
Loading...
