5. Select the Bluetooth device you want to pair with your headset.
6. If your device uses a PIN or code, type the PIN or verify the code.
Paired devices will be listed on the Bluetooth screen.
§ To disconnect a device, select the device name and then select Disconnect.
§ To unpair a selected device, select Forget.
Setting up and using Kiosk mode
With Kiosk mode , you can limit users to access only certain apps and settings on your headset.
This is helpful for demonstrations, training, or certain enterprise environments where full control
of the headset might not meet organizational needs.
Here's how to set up and enter Kiosk mode:
1. From the Lobby, select Settings.
2. Select Advanced Kiosk mode.
3. Set a passcode, choose apps, and choose the settings appropriate for the Kiosk mode
session.
4. Select Enter Kiosk mode to start Kiosk mode.
To leave Kiosk mode, press and hold the headset button to open the Power menu, and then
select Quit Kiosk mode. Enter the passcode if you have one.
Installing system and firmware updates
Keep your VIVE Focus Vision system and firmware up-to-date with the latest features or
enhancements.
Your headset will periodically check for updates and may prompt you to install them when they
become available. If you choose not to install an update right away, you can install it later in
Settings.
To install an update via Settings:
1. If you're currently running an app, press the VIVE button on the right controller, and then
select Back to Lobby.
2. From the Lobby, select Settings.
3. Select General and then select Update next to System update.
If you don't see the yellow indicator, you can also select
Check now to check for updates
manually.
To install updates automatically:
70 Settings
To Next Page
Loading...
