Step 2 In the Wi-Fi network list, tap .
Step 3 Tap WPS Pin Entry.
The IP phone automatically generates a PIN.
Step 4 Enter the PIN on the Wi-Fi hotspot.
----End
Configuring Advanced Wi-Fi Settings
Step 1
In the Wi-Fi network list, tap .
Step 2 Tap ADVANCED.
Step 3 Set parameters based on the site requirements.
----End
Disabling Wi-Fi
On the Notifications screen, tap to disconnect the phone from Wi-Fi.
27.1.3 Bluetooth
Nearby Bluetooth devices can easily exchange data or media files by setting up direct wireless
connections.
NOTE
l Take appropriate security measures while sharing or receiving data through Bluetooth. Ensure that devices
are trusted ones. If there are barriers between two Bluetooth devices, the Bluetooth-supported distance may
be shortened.
l Bluetooth devices of different models may not be fully compatible. If two Bluetooth devices cannot set up
a wireless connection, try other Bluetooth devices.
Turning Bluetooth On
Step 1 Tap
. On the APPLICATION tab, tap Settings.
Step 2 In the WIRELESS & NETWORKS area, tap the Bluetooth switch to turn Bluetooth on.
After Bluetooth is enabled, your IP phone name will be displayed on the Bluetooth screen. You
can tap your IP phone name to set whether your IP phone is visible to other Bluetooth-enabled
devices.
----End
Searching for and Pairing Bluetooth Devices
Step 1 In the WIRELESS & NETWORKS area, tap Bluetooth.
The IP phone automatically scans for and lists nearby Bluetooth devices.
Step 2 In the device list, tap the device you want to pair with your IP phone.
eSpace 8950 IP Phone
User Guide
27 Settings
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
93
To Next Page
Loading...
