If You Want to... Then...
End a conference
1. Tap .
2. In the dialog box that is displayed, tap End.
NOTE
l The conference initiator can tap
to end the conference.
l Participants can tap
to quit the conference.
25.3 Group Conferences (for IMS+UC)
NOTE
l Ensure that your account is a UC account and has been assigned the instant conference service rights
on the server.
l Ensure that on the phone web page, you have enabled the instant conference service rights.
l For any questions, contact your system administrator.
Step 1 Tap
.
Step 2 On the Groups tab, tap a group.
Step 3 Tap on the group details screen.
NOTE
If you want to change the number of a participant, you can tap and hold the participant. On the participant details
screen, select the target number and then tap OK.
Step 4 Optional: Tap Continue to add more participants.
Step 5 Tap Audio Conference or Video Conference.
NOTE
You can upgrade an audio conference to a video conference, but you cannot change a video conference to an
audio conference.
----End
After you create a group conference, you can perform operations described in the following
table.
NOTE
During a conference, a conference participant can perform only the following operations: viewing participant
details, mute himself/herself, and quitting the conference. In a video conference, common participants can enable
or disable local video and display video in full screen.
eSpace 8950 IP Phone
User Guide
25 Conferences
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
75
To Next Page
Loading...
