14 DND
After the DND function is enabled, all incoming calls are automatically rejected but you can
still place calls.
NOTE
l Before using the Server DND function, ensure that your account has been assigned the Server DND service
rights on the IP phone and server. For any questions, contact your system administrator.
l The Server DND function is available only for the current number. For a new number, you must enable the
Server DND function again.
Setting DND
In the IMS+UC network environment, the DND function is set on eSpace Portal. For detailed
operations, see the eSpace UC Product Documentation.
In the UC2.X network environment, you can set the DND function on your phone LCD screen
or web page. For detailed operations, see Table 14-1.
Table 14-1 DND setting
If You Want to... Then...
Set DND on the phone
LCD screen
1. Tap . On the APPLICATION tab, tap Settings.
2. In the Call Settings area, tap DND Settings.
3. Tap a desired DND mode.
l Server DND: The phone does not receive any calls.
l Local DND: Tap either Call Reject or Ringer Off.
Set DND on the web
page
1. Choose Call Settings > DND.
2. Select a DND mode.
l Server DND: The phone does not receive any calls.
l Local DND: Select either Call Reject or Ringer Off.
3. Click Save.
eSpace 8950 IP Phone
User Guide
14 DND
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
43
To Next Page
Loading...
