Connecting to a Wi-Fi Network Using WPS PIN
You can use WLAN Protected Setup (WPS) to simplify connection to a Wi-Fi network. Simply
enter a PIN, and a secure Wi-Fi connection is then automatically set up. You do not need to
perform complex configurations on the management software for the Wi-Fi hotspot (for
example, a wireless router).
Step 1 In the WIRELESS & NETWORKS area, tap the Wi-Fi switch to turn Wi-Fi on.
Step 2 In the Wi-Fi network list, tap
.
Step 3 Tap WPS Pin Entry.
The IP phone automatically generates a PIN.
Step 4 Enter the PIN on the Wi-Fi hotspot.
----End
Configuring Advanced Wi-Fi Settings
Step 1 In the Wi-Fi network list, tap
.
Step 2 Tap ADVANCED.
Step 3 Set parameters based on the site requirements.
----End
Disabling Wi-Fi
On the Notifications screen, tap to disconnect the phone from Wi-Fi.
1.6 Language and Input
1.6.1 Language and Input
Step 1 Tap . On the APPLICATION tab, tap Settings.
Step 2 In the PERSONAL area, tap Language & input.
The language and input settings screen is then displayed. On this screen, you can set the following
parameters:
l Language: Select a language for your IP phone.
l Spell checker: Select to enable spelling correction for your contact information.
l Personal dictionary: Add words and shortcut keys to your personal dictionary.
l Default: Set a default input method for your IP phone.
l Android keyboard (AOSP): Select and set specific Android keyboard (AOSP) options.
l Huawei IME: Select and set specific Huawei input method options.
l Text-to-speech output: Set the text-to-speech speed and default language.
eSpace 8950 IP Phone
User Guide
1 Getting Started
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13
To Next Page
Loading...
