Huawei eSpace 8950 - Performing Operations During a Call

6.3 Performing Operations During a Call
6.3.1 Viewing a Contact's Name, Department, and Profile Picture
If you have saved detailed information about a contact, such as name, number, department, and
profile picture, in Contacts, the contact information is displayed on the screen when you are
placing a call to or receiving a call from the contact or when you are engaged in a call with the
contact.
If the calling party matches a contact in CorpDir, you can also see the contact's name,
department, and profile picture.
6.3.2 Muting Calls
After muting a call, you can hear the other party but the other party cannot hear you. The mute
function is effective in the handset, speaker, or headset mode.
Enabling the Mute Function
During a call, press
or tap .
Disabling the Mute Function
During a call, press or tap .
NOTE
The mute function is effective only during the call, but not when a call comes in or is placed on hold.
6.3.3 Switching Between the Handset, Speaker, and Headset
During a call, you can easily switch between the handset, speaker, and headset.
NOTE
To switch to the headset, make sure that you have a headset ready.
l To switch to the speaker
In the handset or headset mode, press
or tap . eSpace 8950 is then switched to
the speaker mode. At the time,
is displayed in the call control area.
l To switch to the handset
In speaker or headset mode, you can pick up the handset and eSpace 8950 is then switched
to the handset mode.
l To switch to the headset
eSpace 8950 IP Phone
User Guide
6 Call
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
30