If you have enabled automatic video call placing or answering, your phone will automatically
start video call answering when a call comes in, irrespective of whether you answer it using a
handset, speaker, or headset. If you do not want to use video call answering, tap Audio
Answer.
6.1.2 Auto-answering Calls
After the auto answer function is enabled, your IP phone will automatically answer an incoming
call if you do not answer it within a specific period of time (for example, 10s). The time is
configurable.
You can enable or disable the auto answer function of the phone on the web page.
Enabling Auto Answer
Step 1 One the web page, choose Call Settings > Auto Answer.
Step 2 Select Enable for Auto Answer.
Step 3 Set the amount of time in Delay Time.
Step 4 Click Save.
----End
Disabling Auto Answer
Step 1 One the web page, choose Call Settings > Auto Answer.
Step 2 Select Disable for Auto Answer.
Step 3 Click Save.
----End
6.1.3 Call Divert
The call divert function allows you to transfer a call to a third party directly.
NOTE
Before using the call divert function, ensure that your account has been assigned the call divert service rights.
For any questions, contact your system administrator.
Step 1 When a call comes in, tap Transfer.
Step 2 Enter a third-party number.
You can also directly select a contact from the contact list or call history.
Step 3 Tap
.
----End
6.1.4 One Button to Voicemail
eSpace 8950 IP Phone
User Guide
6 Call
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
26
To Next Page
Loading...
