NOTE
During a conference, a conference participant can perform only the following operations: viewing participant
details, mute himself/herself, and quitting the conference. In a video conference, common participants can enable
or disable local video and display video in full screen.
Table 25-4 Instant conference
If You Want to... Then...
Add a participant
1. On the conference screen, tap to access the dialing screen.
2. Add a participant.
3. Tap OK.
NOTE
eSpace 8950 supports a maximum of six instant conferences, with each
conference supporting a maximum of 20 participants. If more than 20
participants are in the participant list, only the first 20 participants can join
the conference.
Change an audio
conference to a
video conference
1. Tap .
2. Tap Video Conference.
Enable or disable
local video
1. Tap .
2. Tap Stop Video or Start Video.
Display video in
full screen
1. Tap a participant in the participant list.
2. Tap Full Screen.
Change the display
sequence of a
participant
1. Tap a participant in the participant list.
2. Tap Replace and tap the replacing participant.
Mute a participant 1. Tap the profile picture of a participant.
2. Tap Mute.
NOTE
To unmute a participant, tap Unmute.
View the details of
a participant
1. Tap the profile picture of a participant.
2. Tap Details.
Mute or unmute
yourself
l To mute yourself: Press or tap while on a call.
l To unmute yourself: Press or tap while in the mute state.
Delete a participant 1. Tap the profile picture of a participant.
2. Tap Delete.
3. In the dialog box that is displayed, tap OK.
eSpace 8950 IP Phone
User Guide 25 Conferences
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
74
To Next Page
Loading...
